陽極氧化鋁絲網印刷油墨

昆山和必勝貿易有限公司為您提供陽極氧化鋁絲網印刷油墨。油墨特性：
主要用于鐵、鋁、鋼等五金底材的印刷材料上，具有高遮蓋力、高穩定性，耐酒精等特點，單組份自干型。
干燥條件：
5-10分鐘表干，自然干常溫4-5小時可測試，如需快速干燥請烘烤50—150度，5-10分鐘。
稀釋：用783開油。清洗：用718洗網水清洗
測試方式：（完全干燥、反應后）
1．3m膠紙，粘在畫有百格的油墨表面，45度角迅速拉起不脫油；
2．純度99%的酒精，500g力在油墨表面來回擦拭，100次無脫色。
使用方法：
1．使用前應充分?jǐn)嚢�，用�?密封；
2．印刷時加入10-20%的開油水，稀釋至合適印刷粘度；
3．不得與其它類型油墨混合使用。
注意事項：
1．五金材料種類多、品種雜，客戶需試印，確定其符合要求后，再批量印刷；
2．環境溫度過高，會影響油墨原有；
3．請遠離火源，陰暗干燥環境下存放。oleser hardware printing ink
ink characteristic:
is mainly used for iron, aluminum, steel&other metal base material of printed materials, with high covering power, high stability, resistance to alcohol etc. characteristics, one component self drying type.
drying condition:
5-10 minutes dry, dry natural temperature 4-5 hours can be tested, such as the need for quick drying please bake 50 - 150 degrees, 5-10 minutes.
dilution: with 783 open oil. wash: wash with 718 wash water
test method: (completely dry, after reaction)
1.3m tape, adhesive tapes ink surface in the painting, the 45 degree angle quickly pulled off the oil;
2 purity 99% alcohol, 500g force in the ink surface back&forth, the 100 no decolorization.
usage:
1 before use should be fully stirred, with the seal after;
2 when printing 10-20% to open the oil, dilute to the appropriate printing viscosity;
3 not mixed with other types of ink.
notes:
1 hardware material types, miscellaneous varieties, customers need to try printing, determine its meet the requirements, then bulk printing;
2 high temperature, will affect the quality of ink;
3 please keep away from fire source, dry environment&dry environment..

     本公司主營： 印刷機械 - 印刷耗材 - 絲印油墨 - 移印油墨 - 印刷油墨
     本文鏈接：http://jiewangda.cn/gongying/94719389.html
     聯系我們時請一定說明是在100招商網上看到的此信息，謝謝！
     聯系電話：19524404502，021-59507952，歡迎您的來電咨詢！