景德鎮滑軌機-工業滑軌機-蒲生機械(商家)

輕鋼龍骨機技術參數

　　設備長度7600mm，寬950mm，高1000mm;

　　設備動力11千瓦，液壓站動力11千瓦;

　　軋輥采用軸承鋼(gr15)，鍛打后退火;

　　底座采用320工字鋼;

　　采用下五上四道校平，-平整;

　　采用二次成型式，-產品的方正和直角，上邊大小都可制作;

　　軋制材料厚度1.5mm-3mm(也可根據用戶要求設計厚度);

　　軋制c型鋼的寬度為80mm-300mm;

　　軋制速度8-9m/min

常見故障排除

common problems to solve

  c型鋼小邊跑斜：通過進料端調節夾輥調節，如在左邊小邊大則左端夾輥松開，布簾滑軌機，調緊右端夾輥（注：適量調節）。

c payments small ran oblique: through feeding end adjustment clamp roll adjustment， as on the left side is the left side roller to loosen， tighten the right end clamp roll (note: make suitable ajdustment).

  c型鋼橫向彎曲：如c型鋼向左端彎曲時，松開出料端第二排左端夾輥，調緊右端夾輥（注：適量調節）。

c payments transverse bending， such as c payments to left side bending，歐式滑軌機， loosen the discharge end of the second row of the left clamp roll， tighten the right end clamp roll (note: make suitable ajdustment).

   縱向彎曲：c型鋼向上彎曲時，向下壓緊后一排調直軸，向下彎曲則向上頂緊第二排調直軸（注：適量調節）

longitudinal bending: c steel bending upward， pressing down on them in the last row straightening shaft&downward bending straightening up top tight the second row axis (note: make suitable ajdustment)